Incubator Memmert IN55
Rp 26.700.000
`Beli Sekarang
`Tambah ke Keranjang


  • Set temperature range in °C min. 5°C above ambient up to +80°C
  • Setting accuracy temperature 0.1°C
  • Temperature Control technology 1 Pt100 sensor DIN class A in 4-wire-circuit
Language setting
  • German, English, Spanish, French, Polish, Czech, Hungarian
  • SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
  • Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • Function SetpointWAIT
  • the process time does not start until the set temperature is reached
  • three freely selectable temperature values
Adjustable parameters
  • temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation Convection natural convection

  • Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
  • Vent connection with restrictor flap
  • Documentation programme stored in case of power failure
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
  • Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
  • Autodiagnostic systemfor fault analysis
Standard equipment
  • Works calibration certificate incl. works calibration certificate for +37°C
  • Door fully insulated stainless steel door with 2-point locking (compression door lock)
  • Door inner glass door Internals
  • 1 stainless steel grid
Stainless steel interior
  • Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • Volume 53 l
  • Dimensions W x H x D in mm w(A) x h(B) x d(C): 400 x 400 x 330 mm
  • Max. number of internals 4
  • Max. loading of chamber 80 kg
  • Max. loading per internal 20 kg

Textured stainless steel casing

  • Dimensions w(D) x h(E) x d(F): 585 x 784 x 514 mm
  • Housing rear zinc-plated steel

Electrical data

  • Voltage Electrical load 230 V, 50/60 Hz approx. 1000 W
  • Voltage Electrical load 115 V, 50/60 Hz approx. 900 W

Packing/shipping data

Customs tariff number 8419 8998
  • Country of origin Federal Republic of Germany WEEE-Reg.-No.DE 66812464
  • Dimensions approx incl. carton B x H x T: 730 x 950 x 670 mm
  • Net weight Approx. 57 kg
  • Gross weight carton Approx. 76 kg

Produk Lainnya

PT. Presisi Labtools Indonesia
MTH Square GF, Jl. Letjen M.T. Haryono No.Kav 10, RT.6/RW.12, Cawang, Kecamatan Jatinegara, Kota Jakarta Timur, Daerah Khusus Ibukota Jakarta 13330
Labtools.id - Bekasi
Jl. Ujung Harapan Bahagia RT 001 RW 002 gg. Pembaharuan No. 67. Babelan, Kab Bekasi, Jawa Barat, 17612
Jl. Bonto Bila VII No.10, Batua, Kec. Manggala, Kota Makassar, Sulawesi Selatan 90233
Media Sosial
Exclusive Dealer
Available on :
Media Partners
@2024 labtools.id Inc.